Use the keyring component or keyring plugin

The keyring_vault plugin can store the encryption keys inside the HashiCorp Vault.

See also

Hashicorp Documentation: Installing Vault
Hashicorp Documentation: Production Hardening

Percona Server for MySQL may use either of the following plugins:

• keyring_file stores the keyring data locally

• keyring_vault provides an interface for the database with a HashiCorp Vault server to store key and secure encryption keys.

Note

The keyring_file plugin should not be used for regulatory compliance.

To install the plugin, follow the installing and uninstalling plugins instructions.

Load the keyring plugin

You should load the plugin at server startup with the -early-plugin-load option to enable keyrings.

Warning

Only one keyring plugin should be enabled at a time. Enabling multiple keyring plugins is not supported and may result in data loss.

We recommend that you load the plugin in the configuration file to facilitate recovery for encrypted tables. Also, the redo log encryption and the undo log encryption cannot be used without --early-plugin-load. The normal plugin load happens too late in startup.

Note

The keyring_vault extension, “.so” and the file location for the vault configuration should be changed to match your operating system’s extension and the file location in your operating system.

To use the keyring_vault, you can add this option to your configuration file:

[mysqld]
early-plugin-load="keyring_vault=keyring_vault.so"
loose-keyring_vault_config="/home/mysql/keyring_vault.conf"

The keyring_vault extension, ".so" and the file location for the vault
configuration should be changed to match your operating system's extension
and operating system location.

You could also run the following command which loads the keyring_file plugin:

$ mysqld --early-plugin-load="keyring_file=keyring_file.so"

Note

If a server starts with multiple plugins loaded early, the --early-plugin-load option should contain the plugin names in a double-quoted list, separating each plugin name by a semicolon. The double quotes ensure the semicolons do not create issues when executing the list in a script.

After installing the plugin, you must also point the keyring_vault_config variable to the keyring_vault configuration file.

The keyring_vault_config file has the following information:

• vault_url - the Vault server address

• secret_mount_point - the mount point name where the keyring_vault stores the keys.

• secret_mount_point_version - the KV Secrets Engine version (kv or kv-v2) used. Implemented in Percona Server for MySQL 8.0.23-14.

• token - a token generated by the Vault server

• vault_ca [optional] - if the machine does not trust the Vault’s CA certificate, this variable points to the CA certificate used to sign the Vault’s certificates

This is an example of a configuration file:

vault_url = https://vault.public.com:8202
secret_mount_point = secret
secret_mount_point_version = AUTO
token = {randomly-generated-alphanumeric-string}
vault_ca = /data/keyring_vault_confs/vault_ca.crt

Warning

Each secret_mount_point must be used by only one server. If multiple servers use the same secret_mount_point, the behavior is unpredictable.

The first time a key is fetched from a keyring, the keyring_vault communicates with the Vault server to retrieve the key type and data.

secret_mount_point_version information

Implemented in Percona Server for MySQL 8.0.23-14, the secret_mount_point_version can be either a 1, 2, AUTO, or the secret_mount_point_version parameter is not listed in the configuration file.

Value	Description
1	Works with KV Secrets Engine - Version 1 (kv). When forming key operation URLs, the secret_mount_point is always used without any transformations. For example, to return a key named skey, the URL is /v1//skey
2	Works with KV Secrets Engine - Version 2 (kv) The initialization logic splits the secret_mount_point parameter into two parts: The mount_point_path - the mount path under which the Vault Server secret was created The directory_path - a virtual directory suffix that can be used to create virtual namespaces with the same real mount point For example, both the mount_point_path and the directory_path are needed to form key access URLs: /v1/<mount_point_path/data//skey
AUTO	An autodetection mechanism probes and determines if the secrets engine version is kv or kv-v2 and based on the outcome will either use the secret_mount_point as is, or split the secret_mount_point into two parts.
Not listed	If the secret_mount_point_version is not listed in the configuration file, the behavior is the same as AUTO.

If you set the secret_mount_point_version to 2 but the path pointed by secret_mount_point is based on KV Secrets Engine - Version 1 (kv), an error is reported, and the plugin fails to initialize.

If you set the secret_mount_point_version to 1 but the path pointed by secret_mount_point is based on KV Secrets Engine - Version 2 (kv-v2), the plugin initialization succeeds but any MySQL keyring-related operations fail.

Upgrade from 8.0.22-13 or earlier to 8.0.23-14 or later

The keyring_vault plugin configuration files created before Percona Server for MySQL 8.0.23-14 work only with KV Secrets Engine - Version 1 (kv) and do not have the secret_mount_point_version parameter. After the upgrade to 8.0.23-14 or later, the secret_mount_point_version is implicitly considered AUTO and the information is probed and the secrets engine version is determined to 1.

Upgrade from Vault Secrets Engine Version 1 to Version 2

You can upgrade from the Vault Secrets Engine Version 1 to Version 2. Use either of the following methods:

• Set the secret_mount_point_version to AUTO or the variable is not set in the keyring_vault plugin configuration files in all Percona Servers. The AUTO value ensures that the autodetection mechanism is invoked during the plugin’s initialization.

• Set the secret_mount_point_version to 2 to ensure that plugins do not initialize unless the kv to kv-v2 upgrade completes.

Note

The keyring_vault plugin that works with kv-v2 secret engines does not use the built-in key versioning capabilities. The keyring key versions are encoded into key names.

KV Secret Engine considerations for upgrading from 5.7 to 8.0

When you upgrade from Percona Server for MySQL 5.7.32 or older, you can only use KV Secrets Engine 1 (kv). You can upgrade to any version of Percona Server for MySQL 8.0. The old keyring_vault`` plugin and newkeyring_vaultplugin work correctly with the existing Vault Server data under the existingkeyring_vault` plugin configuration file.

If you upgrade from Percona Server for MySQL 5.7.33 or newer, you have the following options: If you are using KV Secrets Engine 1 (kv), you can upgrade to any version of Percona Server for MySQL 8.0. If you use KV Secrets Engine 2 (kv-v2)you can upgrade with *Percona Server for MySQL* 8.0.23 or newer. *Percona Server for MySQL* 8.0.23.14 is the first version of the 8.0 series which has thekeyring_vaultplugin that supportskv-v2`. A user-created key deletion is only possible using the keyring_udf plugin, which deletes the key from the in-memory hash map and the Vault server. You cannot delete system keys, such as the master key.

This plugin supports the SQL interface for keyring key management described in the General-Purpose Keyring Key-Management Functions manual. The plugin library contains user-defined keyring functions allowing access to the internal keyring service functions. To enable the functions, you must enable the keyring_udf plugin:

mysql> INSTALL PLUGIN keyring_udf SONAME 'keyring_udf.so';

Note

The keyring_udf plugin must be installed. Using the user-defined functions without the keyring_udf plugin generates an error.

You must also create keyring encryption user-defined functions.

Use the keyring_file component

See keyring component installation for information on installing the component.

Warning

The keyring_file component should not be used for regulatory compliance.

See also

MySQL Documentation: Using the keyring_file component

System variables

keyring_vault_config

Option	Description
Command-line	–keyring-vault-config
Scope	Global
Dynamic	Yes
Data type	Text
Default

This variable defines the location of the keyring_vault_plugin configuration file.

keyring_vault_timeout

Option	Description
Command-line	–keyring-vault-timeout
Scope	Global
Dynamic	Yes
Data type	Numeric
Default	15

Set the duration in seconds for the Vault server connection timeout. The default value is 15. The allowed range is from 0 to 86400. The timeout can also be disabled to wait an infinite amount of time by setting this variable to 0.

Get expert help

If you need assistance, visit the community forum for comprehensive and free database knowledge, or contact our Percona Database Experts for professional support and services.

Community Forum Get a Percona Expert

---

Last update: 2024-11-15